Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Ktm
    3. : 690 Enduro R

Ktm 690 Enduro R - Video guides

Ktm 690 Enduro R
How to Replace the Front Brake Pads on the KTM 690 Enduro R?
You can replace the front brake pads on the KTM 690 Enduro R by loosening the screws that secure the brake caliper to the corresponding disc: once the caliper …Read all…
Posted on 23 August 2026 by ScegliAuto
Ktm 690 Enduro R
How do you replace the clutch of the KTM 690?
In order to replace the clutch of the KTM 690, you need to loosen the screws that secure the cover protecting the clutch discs: this cover can be found on the …Read all…
Posted on 30 July 2024 by ScegliAuto
Ktm 690 Enduro R
How to change the engine oil of a KMT 690?
To change the oil of a KTM 690 engine, start by warming up the engine for a few minutes to fluidify the oil. Turn off the engine and place the motorcycle on a …Read all…
Posted on 16 June 2024 by ScegliAuto
Ktm 690 Enduro R
How to Change the Engine Oil on a KTM 690 Enduro R
To change the engine oil on the KTM 690 Enduro R, you need to loosen the drain plug of the oil sump, which is located at the front bottom of the bike. Once the …Read all…
Posted on 3 September 2026 by ScegliAuto
Ktm 690 Enduro R
How to remove the battery on a KTM 690 Enduro?
In this tutorial, we will see how to replace the battery on a KTM 690 Enduro, a very simple and quick operation. First, ensure the key is not inserted, then …Read all…
Posted on 30 August 2026 by ScegliAuto
Ktm 690 Enduro R
How to Replace the Fuel Filter on a KTM 690?
In this tutorial, we will see how to replace the fuel filter on a KTM 690, a very simple and quick operation. First, wait for the engine to cool completely, …Read all…
Posted on 7 August 2026 by ScegliAuto
Ktm 690 Enduro R
How to Set the Time on the KTM Enduro 690 R
In this new guide dedicated to your KTM Enduro 690 R, you will learn how to manually set the correct time on the display. First, insert the key and turn on the …Read all…
Posted on 10 August 2026 by ScegliAuto
Ktm 690 Enduro R
How to replace the levers on a KTM 690 Enduro R
To replace the levers on a KTM 690 Enduro R, disconnect the cables connected to the respective levers by loosening the bolts at the end of each cable. Once …Read all…
Posted on 4 August 2026 by ScegliAuto
Ktm 690 Enduro R
Replace the Air Filter of the Ktm 690 Enduro
In this brief and simple guide, follow the procedure to remove and replace the engine air filter of the Ktm 690 Enduro. First, remove the rider's seat and then …Read all…
Posted on 9 July 2026 by ScegliAuto
Ktm 690 Enduro R
How to Service the KTM 690 Enduro R
In this video, you will see the main steps to replace the engine oil and oil filter while performing the regular service on the KTM 690 Enduro R. First, drain …Read all…
Posted on 18 June 2026 by ScegliAuto
Ktm 690 Enduro R
How to Replace the Rear Brake Pads on a KTM 690?
To replace the rear brake pads on a KTM 690, you need to open the rear brake caliper. To do this, tap the pin that secures the caliper to the disc, pushing it …Read all…
Posted on 4 June 2026 by ScegliAuto
Ktm 690 Enduro R
How to Perform an Oil Change and Filter Replacement on the Ktm 690 Enduro R
In today's video, we will see step-by-step instructions to perform the service, which includes the routine maintenance oil change and oil filter replacement on …Read all…
Posted on 31 May 2026 by ScegliAuto

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos