Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
You can replace the front brake pads on the KTM 690 Enduro R by loosening the screws that secure the brake caliper to the corresponding disc: once the caliper is detached, you can remove the pin that holds the pads in place, allowing you to take out the old replacement parts. The new pads can now be inserted into the caliper and secured with the corresponding pin; you can then reposition the caliper onto the disc and secure it with the appropriate screws to ensure everything functions correctly.

Posted on 23 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Brake Pads on a KTM 690?
How to Replace the Rear Brake Pads on a KTM 690?
690 Enduro R To replace the rear brake pads on a KTM 690, you need to open the rear brake caliper. To do this, tap the pin that secures the caliper to the disc, p…
How to replace the levers on a KTM 690 Enduro R
How to replace the levers on a KTM 690 Enduro R
690 Enduro R To replace the levers on a KTM 690 Enduro R, disconnect the cables connected to the respective levers by loosening the bolts at the end of each cable…
How to remove the battery on a KTM 690 Enduro?
How to remove the battery on a KTM 690 Enduro?
690 Enduro R In this tutorial, we will see how to replace the battery on a KTM 690 Enduro, a very simple and quick operation. First, ensure the key is not inserte…

How to Reset the Engine Oil Light on a Yamaha XMax 250

This short video demonstrates the procedure to reset the engine oil light on a Yamaha XMax 250 scooter. The operation is very simple and quick; first, insert the motorcycle key into the designated slot and turn it to the first position to power on the instrument panel without starting the vehicle. At this point, you will see the light on the display; simply press the "oil change" button located at the centre of the motorcycle's speedometer and hold it until the light stops flashing. The operation will then be complete; to verify success, turn off and then turn on the instrument panel.

Watch the video!


by ScegliAuto

More videos