|
Do it yourself
| |||
| ||||
|
Model: Ktm 690 Enduro R
To replace the rear brake pads on a KTM 690, you need to open the rear brake caliper. To do this, tap the pin that secures the caliper to the disc, pushing it out from the opposite side. Once the pin is removed, the pads can be easily extracted from the caliper. Position the new pads so that the pin can pass through their holes and through the caliper's openings. When the pads are in the correct position, insert the pin and securely close the caliper.
Updated on 23 April 2026 by ScegliAuto
Video tutorial
Related tutorials
690 Enduro R
You can replace the front brake pads on the KTM 690 Enduro R by loosening the screws that secure the brake caliper to the corresponding disc: once th…
690 Enduro R
To replace the levers on a KTM 690 Enduro R, disconnect the cables connected to the respective levers by loosening the bolts at the end of each cable…
690 Enduro R
In this tutorial, we will see how to replace the battery on a KTM 690 Enduro, a very simple and quick operation. First, ensure the key is not inserte…
|
How to replace the coolant in the BMW S1000 R
Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.454
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |