Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The procedure for replacing the motor oil in the Harley Davidson Electra Glide involves loosening the drain plug of the oil pan located in the central lower part of the motorcycle: once this is unscrewed, it will be possible to drain all the old oil into a properly positioned container. Then, the oil filter, located in the same position, can be removed and replaced with a new one; finally, the oil can be topped up by pouring the necessary amount through the vent on the right side of the vehicle.

Posted on 20 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Fender from a Harley Davidson Electra Glide
How to Remove the Front Fender from a Harley Davidson Electra Glide
Electra Glide Before starting, position your Harley Davidson Electra Glide vertically, and if possible, lift it to work more comfortably on the front fender. Begin…
Replacing the Starter Motor on Harley Davidson Electra Glide
Replacing the Starter Motor on Harley Davidson Electra Glide
Electra Glide This video shows the steps to remove and replace the starter motor on a Harley Davidson Electra Glide. First, disconnect the battery. Next, unplug th…
How to Reset the "Service" Light on a Harley Davidson Electra Glide
How to Reset the "Service" Light on a Harley Davidson Electra Glide
Electra Glide Before you can start, sit on the seat of your Harley Davidson Electra Glide. Begin by turning the key in the ignition switch to activate the instrume…

How to Replace the Rear Indicator Bulb on the Sym Mio

To replace the rear indicator bulb on the Sym Mio, you need to loosen the screws that secure the rear fairing of the motorcycle: to do this, you will also need to open the under-seat compartment and loosen the screws that secure the fairing from the inside. Once it is released, you can completely detach it and disconnect the connector attached to the corresponding bulb. The bulb can now be extracted from its housing, allowing you to insert the new one: this way, you can reassemble all the removed parts to ensure everything works correctly.

Watch the video!


by ScegliAuto

More videos