Do it yourself
Frequently asked questions about cars and motorcycles
This video shows the steps to remove and replace the starter motor on a Harley Davidson Electra Glide. First, disconnect the battery. Next, unplug the electrical connector from the starter motor and remove the fixing screws using a Torx spanner. At this point, drain the engine oil and remove the clutch cover by unscrewing all the fixing screws. Then, remove the circlip and the starter motor rod; extract the starter motor and replace it with the new one!

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Electra Glide Today, you will see the instructions that will allow you to remove and replace the starter motor on a Harley Davidson Electra Glide motorcycle. First…
Electra Glide The procedure for replacing the motor oil in the Harley Davidson Electra Glide involves loosening the drain plug of the oil pan located in the centra…
Electra Glide This guide provides the main instructions for removing and replacing the battery on the Harley Davidson Electra Glide motorcycle. First, remove the r…

How do you reset the Oil Check light on the Sym VF 185?

In order to reset the Oil Check light on the Sym VF 185, you need to turn on the instrument panel by turning the key in the ignition switch. Once the panel is on, you can press and hold the button located at the bottom right of the instrument panel for a few seconds. You will need to continue holding the button for a few seconds and then release it before pressing the next button. This will make the Oil Check light disappear from the instrument panel, and you can turn it off again by turning the key in the opposite direction.

Watch the video!


by ScegliAuto

More videos