Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This guide provides the main instructions for removing and replacing the battery on the Harley Davidson Electra Glide motorcycle. First, remove the rider and passenger seats; then unscrew the screws of the voltage regulator located above the battery, disconnecting the electrical cables as shown in the video. Next, unscrew the bolts of both terminals (positive and negative) to remove the battery from the battery tray; replace it with a new one of the correct type and with the same amperage, and reassemble everything!

Updated on 17 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Starter Motor on a Harley Davidson Electra Glide
How to Replace the Starter Motor on a Harley Davidson Electra Glide
Electra Glide Today, you will see the instructions that will allow you to remove and replace the starter motor on a Harley Davidson Electra Glide motorcycle. First…
How to Remove the Front Fender from a Harley Davidson Electra Glide
How to Remove the Front Fender from a Harley Davidson Electra Glide
Electra Glide Before starting, position your Harley Davidson Electra Glide vertically, and if possible, lift it to work more comfortably on the front fender. Begin…
How do you replace the motor oil of the Harley Davidson Electra Glide?
How do you replace the motor oil of the Harley Davidson Electra Glide?
Electra Glide The procedure for replacing the motor oil in the Harley Davidson Electra Glide involves loosening the drain plug of the oil pan located in the centra…

How to Replace the Clutch on a Triumph Speed Triple?

To replace the clutch on a Triumph Speed Triple, loosen the bolts securing the covers of the three casings located on the right side of the bike, namely the starter motor, the engine, and then the clutch. Once these covers are removed, you can access the bolts securing the clutch, unscrew them, and slide the clutch plates out of their housing. This will allow you to insert the new plates into their place, securing everything with the appropriate bolts; finally, reinstall all the casings.

Watch the video!


by ScegliAuto

More videos