Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today, you will see the instructions that will allow you to remove and replace the starter motor on a Harley Davidson Electra Glide motorcycle. First, place the bike on the stand and start by disconnecting both battery terminals; then disconnect the left side of the exhaust manifold by unscrewing the cylinder nuts, as shown in the video. At this point, you can unscrew the starter motor screws, disconnect the wiring to remove it; repair it or replace it with a new original one, and finally start the engine!

Posted on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Starter Motor on Harley Davidson Electra Glide
Replacing the Starter Motor on Harley Davidson Electra Glide
Electra Glide This video shows the steps to remove and replace the starter motor on a Harley Davidson Electra Glide. First, disconnect the battery. Next, unplug th…
How to Remove the Front Fender from a Harley Davidson Electra Glide
How to Remove the Front Fender from a Harley Davidson Electra Glide
Electra Glide Before starting, position your Harley Davidson Electra Glide vertically, and if possible, lift it to work more comfortably on the front fender. Begin…
How to Replace the Battery on the Harley Davidson Electra Glide
How to Replace the Battery on the Harley Davidson Electra Glide
Electra Glide This guide provides the main instructions for removing and replacing the battery on the Harley Davidson Electra Glide motorcycle. First, remove the r…

How to Remove the Final Drive from a BMW R 1200 GS?

To remove the final drive from a BMW R 1200 GS, loosen the bolts securing the exhaust so it can be removed along with the rear wheel. The rear wheel will also be removed by unscrewing the five bolts that secure it to the swingarm. Next, detach the brake caliper by unscrewing the mounting bolts and remove the rear part of the swingarm. Inside, you will find the final drive, which should be extracted and replaced with a new spare part; after replacement, reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos