Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Light Bulb on a Yamaha YBR 125?

Model: Yamaha Ybr 125
Part: Tail light bulb

Video tutorial

Replacing the brake light bulb on the Yamaha YBR 125, as shown in this tutorial, is an extremely simple and quick task. Before proceeding, ensure that the key is not inserted, to operate safely.

Start by going to the rear of the bike, then locate the two screws securing the lamp unit and unscrew them using a standard cross-head screwdriver. Next, separate the cover, grasp the old bulb, and remove it by turning it slightly anti-clockwise.

Finally, insert the replacement, preferably an LED type, and reassemble everything.


Updated on 19 August 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on the Yamaha YBR 125
How to Replace the Front Headlamp Bulb on the Yamaha YBR 125
Ybr 125 As shown in this tutorial, replacing the front headlamp bulb on the Yamaha YBR 125 is an extremely simple and quick operation. First, ensure the key …
How to Replace the Front Headlamp Bulb on the Yamaha YBR 125
How to Replace the Front Headlamp Bulb on the Yamaha YBR 125
Ybr 125 As shown in this tutorial, replacing the front headlamp bulb on the Yamaha YBR 125 is a straightforward and quick task. To do this, in addition to th…
How to Dismantle the Rear Wheel of a Yamaha YBR 125
How to Dismantle the Rear Wheel of a Yamaha YBR 125
Ybr 125 Below are the instructions that will allow you to dismantle and remove the rear wheel of the Yamaha YBR 125. First, place the bike on a stand and sta…

How to Replace the Air Filter on a Honda SH 300i Scooter?

In this tutorial, you will see how to replace the air filter on a Honda SH 300i scooter, a very simple and quick operation. Before proceeding, ensure the engine is completely cold for safety. Start by unscrewing both the 6 screws around the perimeter of the airbox and the 3 bolts of the circular cover, then remove the cover and unscrew the additional screw that has just been freed. Next, separate the box, remove the old filter, and clean the housing of any dirt residue. Finally, follow the reverse procedure to install the replacement.

Watch the video!


by ScegliAuto

More videos