Do it yourself
Frequently asked questions about cars and motorcycles

Model: Yamaha Ybr 125
Part: Wheel

Below are the instructions that will allow you to dismantle and remove the rear wheel of the Yamaha YBR 125. First, place the bike on a stand and start by disconnecting the rear brake shoes cable; then unscrew the central wheel bolt using a socket wrench with an extension. At this point, disconnect the wheel and lift the rear wheel off the ground to remove it; proceed with any necessary repairs or replacements, then reassemble the rear wheel and adjust the drive chain.

Posted on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Ybr 125 To replace the exhaust on the Yamaha YBR 125, loosen the bolts securing it to its housing at the rear of the bike, right next to the rear wheel: once…
Ybr 125 To replace the clutch on the Yamaha YBR 125, loosen the screws securing the cover located on the right side of the bike at the front. Once the cover …
Ybr 125 Let’s discover the guide that will allow you to carry out the routine maintenance service by changing the engine oil on the Yamaha YBR 125 motorcycle…

How to Replace the Battery in the Ducati Sport 1000?

In this tutorial, you will see how to replace the battery in the Ducati Sport 1000, a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat, locate the plastic box underneath it, and using a 10mm socket, unscrew the two bolts. Once done, detach the external strap, open the cover, and disconnect both terminals starting with the negative. At this point, you can remove the old battery from the housing, insert the replacement, and reassemble everything.

Watch the video!


by ScegliAuto

More videos