Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on a Yamaha YBR 125

Model: Yamaha Ybr 125
Part: Battery

Video tutorial

To replace the battery on a Yamaha YBR 125, insert the key into the lock located on the left side of the bike, just below the seat. This will allow you to completely detach the panel, giving access to the battery underneath.

Disconnect the power cables and remove the bracket securing it in place. The battery can then be fully extracted and replaced with a new part; after replacement, cover everything back with the panel, ensuring the bike functions correctly.


Updated on 27 August 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch on a Yamaha YBR 125?
How to Replace the Clutch on a Yamaha YBR 125?
Ybr 125 To replace the clutch on the Yamaha YBR 125, loosen the screws securing the cover located on the right side of the bike at the front. Once the cover …
How to Replace the Brake Light Bulb on a Yamaha YBR 125?
How to Replace the Brake Light Bulb on a Yamaha YBR 125?
Ybr 125 Replacing the brake light bulb on the Yamaha YBR 125, as shown in this tutorial, is an extremely simple and quick task. Before proceeding, ensure tha…
How to Dismantle the Rear Wheel of a Yamaha YBR 125
How to Dismantle the Rear Wheel of a Yamaha YBR 125
Ybr 125 Below are the instructions that will allow you to dismantle and remove the rear wheel of the Yamaha YBR 125. First, place the bike on a stand and sta…

How to Replace the Air Filter on a Honda SH 300i Scooter?

In this tutorial, you will see how to replace the air filter on a Honda SH 300i scooter, a very simple and quick operation. Before proceeding, ensure the engine is completely cold for safety. Start by unscrewing both the 6 screws around the perimeter of the airbox and the 3 bolts of the circular cover, then remove the cover and unscrew the additional screw that has just been freed. Next, separate the box, remove the old filter, and clean the housing of any dirt residue. Finally, follow the reverse procedure to install the replacement.

Watch the video!


by ScegliAuto

More videos