Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch on a Yamaha YBR 125?

Model: Yamaha Ybr 125
Part: Clutch

Video tutorial

To replace the clutch on the Yamaha YBR 125, loosen the screws securing the cover located on the right side of the bike at the front. Once the cover is removed, you will find the underlying clutch.

Remove the clutch from its housing by loosening the securing screws and taking out all the discs that make it up. After the old clutch has been removed from its seat, insert the new one, securing it properly and then cover everything with the clutch cover.


Updated on 5 September 2026 by ScegliAuto


Related tutorials

How to Replace the Battery on a Yamaha YBR 125
How to Replace the Battery on a Yamaha YBR 125
Ybr 125 To replace the battery on a Yamaha YBR 125, insert the key into the lock located on the left side of the bike, just below the seat. This will allow y…
How to Dismantle the Rear Wheel of a Yamaha YBR 125
How to Dismantle the Rear Wheel of a Yamaha YBR 125
Ybr 125 Below are the instructions that will allow you to dismantle and remove the rear wheel of the Yamaha YBR 125. First, place the bike on a stand and sta…
How to Change the Engine Oil on a Yamaha YBR 125
How to Change the Engine Oil on a Yamaha YBR 125
Ybr 125 Let’s discover the guide that will allow you to carry out the routine maintenance service by changing the engine oil on the Yamaha YBR 125 motorcycle…

How to Replace the Air Filter on a Honda SH 300i Scooter?

In this tutorial, you will see how to replace the air filter on a Honda SH 300i scooter, a very simple and quick operation. Before proceeding, ensure the engine is completely cold for safety. Start by unscrewing both the 6 screws around the perimeter of the airbox and the 3 bolts of the circular cover, then remove the cover and unscrew the additional screw that has just been freed. Next, separate the box, remove the old filter, and clean the housing of any dirt residue. Finally, follow the reverse procedure to install the replacement.

Watch the video!


by ScegliAuto

More videos