Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Yamaha YBR 125

Model: Yamaha Ybr 125
Part: Engine oil

Video tutorial

Let’s discover the guide that will allow you to carry out the routine maintenance service by changing the engine oil on the Yamaha YBR 125 motorcycle. First, place the bike on its centre stand and start by unscrewing the oil drain bolt located under the engine, using a socket spanner, allowing it to drain into a container for about ten minutes; then unscrew the filler screw to top up. At this point, pour in the new engine oil using a funnel of the correct type (in this case, 10W40), following the video tutorial to the end!


Updated on 11 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil of a Yamaha YBR 125
How to Change the Engine Oil of a Yamaha YBR 125
Ybr 125 To change the engine oil of a Yamaha YBR 125, start by positioning the bike on a flat surface and ensure the engine is cold. Remove the oil filler ca…
How to Dismantle the Rear Wheel of a Yamaha YBR 125
How to Dismantle the Rear Wheel of a Yamaha YBR 125
Ybr 125 Below are the instructions that will allow you to dismantle and remove the rear wheel of the Yamaha YBR 125. First, place the bike on a stand and sta…
How to Replace the Battery on a Yamaha YBR 125
How to Replace the Battery on a Yamaha YBR 125
Ybr 125 To replace the battery on a Yamaha YBR 125, insert the key into the lock located on the left side of the bike, just below the seat. This will allow y…

How to Change the Engine Oil on a BMW R1200T?

To change the engine oil on a BMW R1200T, follow these steps. Ensure the bike is on a level surface and the engine is warm but not too hot. Remove the oil filler cap and the oil drain plug, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew it to fully drain the used oil. Once drained, remove and replace the oil filter, ensuring to clean the mounting surface thoroughly. Install the new filter and screw the oil drain plug back in. Fill the engine with new oil through the filler cap until reaching the recommended amount, checking the level with the dipstick if necessary. Secure both caps tightly. Start the engine for a few minutes to circulate the new oil, then turn it off, and the replacement is complete.

Watch the video!


by ScegliAuto

More videos