Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on the Yamaha YBR 125

Model: Yamaha Ybr 125
Part: Headlight bulb

Video tutorial

As shown in this tutorial, replacing the front headlamp bulb on the Yamaha YBR 125 is a straightforward and quick task. To do this, in addition to the correct H4 replacement bulb, you will need a cross-head screwdriver.

Start by ensuring the key is not in the ignition, then unscrew the two side screws of the headlamp and remove it from the housing. Next, disconnect the power connector, remove the large rubber cap, and extract the bulb by turning the collar counterclockwise.

Once the replacement is inserted, follow the reverse procedure to reassemble everything.


Updated on 14 July 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on the Yamaha YBR 125
How to Replace the Front Headlamp Bulb on the Yamaha YBR 125
Ybr 125 As shown in this tutorial, replacing the front headlamp bulb on the Yamaha YBR 125 is an extremely simple and quick operation. First, ensure the key …
Replacing the Front Bulb on a Yamaha YBR
Replacing the Front Bulb on a Yamaha YBR
Ybr 125 Replacing the front bulb on a Yamaha YBR 125 is very simple, and now we will show you how. Start by unscrewing the screws that secure the round headl…
How to Replace the Brake Light Bulb on a Yamaha YBR 125?
How to Replace the Brake Light Bulb on a Yamaha YBR 125?
Ybr 125 Replacing the brake light bulb on the Yamaha YBR 125, as shown in this tutorial, is an extremely simple and quick task. Before proceeding, ensure tha…

How to Change the Engine Oil on a BMW R1200T?

To change the engine oil on a BMW R1200T, follow these steps. Ensure the bike is on a level surface and the engine is warm but not too hot. Remove the oil filler cap and the oil drain plug, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew it to fully drain the used oil. Once drained, remove and replace the oil filter, ensuring to clean the mounting surface thoroughly. Install the new filter and screw the oil drain plug back in. Fill the engine with new oil through the filler cap until reaching the recommended amount, checking the level with the dipstick if necessary. Secure both caps tightly. Start the engine for a few minutes to circulate the new oil, then turn it off, and the replacement is complete.

Watch the video!


by ScegliAuto

More videos