Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the motor oil in the Suzuki V-Strom 1000?

Model: Suzuki V Strom 1000
Part: Engine oil

Video tutorial

In this tutorial we can see how to replace the engine oil in the Suzuki V-Strom 1000, an extremely simple and fast operation. First of all, make sure that the engine is cold enough, then remove the lower cover by unscrewing the various fixing screws.

Then place a container under the motorcycle, locate the drain hole bolt, unscrew it using a 17mm socket wrench and let all the oil contained in the system drain out. At this point, all that remains is to remove the old filter, tighten the replacement, reassemble everything and pour the new oil through the appropriate upper hole.


Posted on 19 March 2025 by ScegliAuto


Related tutorials

How to replace the engine oil in the Suzuki V-Strom 1000?
How to replace the engine oil in the Suzuki V-Strom 1000?
V Strom 1000 .. how to replace the engine oil in the Suzuki V-Strom 1000, an extremely simple and quick operation. First, let's make sure that the engine is cold enough.. …
How do you replace the motor oil of the Suzuki V-Strom DL1000?
How do you replace the motor oil of the Suzuki V-Strom DL1000?
V Strom 1000 To replace the motor oil of the Suzuki V-Strom DL1000, you will need to loosen the drain plug of the oil pan located in the central lower part of the…
How to Replace the Rear Shock Absorber on a Suzuki V-Strom 1000?
How to Replace the Rear Shock Absorber on a Suzuki V-Strom 1000?
V Strom 1000 .. To replace the rear shock absorber on a Suzuki V-Strom 1000, loosen the bolts securing it to its housing, which is located in the central part of the.. …

How to Replace the Belt and Rollers on the Piaggio Vespa GTS 300

This guide briefly outlines the steps to remove and replace the belt and rollers of the variator on the Piaggio Vespa GTS 300 scooter, following the instructions below. First, place your scooter on the centre stand and begin unscrewing the screws of the transmission cover to remove it; then unscrew the nut of the fan and that of the clutch bell, as shown in the video. At this point, remove the belt and then the variator, replacing the rollers found inside; install the new belt and reassemble the transmission!

Watch the video!


by ScegliAuto

More videos