Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the levers of the KTM XC 300?

Model: Ktm Xc 300
Part:

Video tutorial

In order to replace the levers of the KTM XC 300, you need to loosen the screws that fix them to the respective housings at the ends of the handlebars: once these screws have been loosened, you can proceed by also loosening the bolts that connect the brake and clutch cables to the appropriate levers.

In this way, it will be possible to completely detach the old levers from their housing: by doing this, you can connect the new levers to the cables so that they can be fixed to their housing.

After installation, you will need to check that everything is functioning properly.


Posted on 20 March 2025 by ScegliAuto


Related tutorials

How to Replace the Coolant in the KTM XC 300
How to Replace the Coolant in the KTM XC 300
Xc 300 Follow this guide on how to replace the coolant in the KTM XC 300 enduro bike, as well as the XC-W 300. First, place your bike on a stand and start b…
Removal and Replacement of the Rear Suspension on a KTM XC 300
Removal and Replacement of the Rear Suspension on a KTM XC 300
Xc 300 Here are the main instructions for removing and replacing the rear suspension on the KTM XC 300 enduro bike. First, place the bike on a stand and beg…
How to Perform Maintenance Service on KTM XC 300
How to Perform Maintenance Service on KTM XC 300
Xc 300 In this video, learn how to change the engine oil while performing the regular maintenance service on a KTM XC 300, as well as on most enduro bikes. …

How to Replace the O-ring on the Clutch Rod of the LML Star?

To replace the O-ring on the clutch rod of the LML Star, lift the bike to loosen the side panel located near the rear wheel. Next, unscrew all the screws securing the rear wheel and the corresponding transmission cover: by removing the clutch, you will be able to locate the rod positioned behind it. This rod can now be removed from its housing by unscrewing the fastening screws; after the old rod has been removed, slide out the O-ring, replace it with a new one, and reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos