Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal and Replacement of the Rear Suspension on a KTM XC 300

Model: Ktm Xc 300
Part: Suspension system

Video tutorial

Here are the main instructions for removing and replacing the rear suspension on the KTM XC 300 enduro bike. First, place the bike on a stand and begin by removing the rear wheel, loosening the central axle with a socket spanner.

Next, remove the rear swingarm to access the suspension, as shown in the video. Now, unscrew the lower and upper bolts of the suspension to remove it and replace it with the new one; adjust it accordingly and reassemble everything!


Updated on 21 August 2026 by ScegliAuto


Related tutorials

How to Replace the Coolant in the KTM XC 300
How to Replace the Coolant in the KTM XC 300
Xc 300 Follow this guide on how to replace the coolant in the KTM XC 300 enduro bike, as well as the XC-W 300. First, place your bike on a stand and start b…
Changing the Gearbox Oil of the KTM XC 300
Changing the Gearbox Oil of the KTM XC 300
Xc 300 In this tutorial, you will see how to change the transmission oil while performing the regular maintenance service on the KTM XC 300 2-stroke enduro …
How to replace the fender and front headlight of the KTM XC 300
How to replace the fender and front headlight of the KTM XC 300
Xc 300 Today we will see the main instructions useful for replacing and installing the fender and front headlight of the KTM XC 300 enduro motorcycle. First…

How to Replace the O-ring on the Clutch Rod of the LML Star?

To replace the O-ring on the clutch rod of the LML Star, lift the bike to loosen the side panel located near the rear wheel. Next, unscrew all the screws securing the rear wheel and the corresponding transmission cover: by removing the clutch, you will be able to locate the rod positioned behind it. This rod can now be removed from its housing by unscrewing the fastening screws; after the old rod has been removed, slide out the O-ring, replace it with a new one, and reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos