Do it yourself
Frequently asked questions about cars and motorcycles

Model: Ktm 690 Enduro R
Part: Clock

In this new guide dedicated to your KTM Enduro 690 R, you will learn how to manually set the correct time on the display. First, insert the key and turn on the instrument panel if you haven't done so already. Then locate the "Set" and "Mode" buttons on the left side of the panel and hold them down simultaneously until the time on the display starts to flash. At this point, use the upper button to change the hour digits and the lower button to change the minute digits. Finally, press both buttons again to save the changes.

Updated on 7 June 2026 by ScegliAuto

Video tutorial

Related tutorials

690 Enduro R In this video, you will see the main steps to replace the engine oil and oil filter while performing the regular service on the KTM 690 Enduro R. Fir…
690 Enduro R In this tutorial, we will see how to replace the battery on a KTM 690 Enduro, a very simple and quick operation. First, ensure the key is not inserte…
690 Enduro R To change the engine oil on the KTM 690 Enduro R, you need to loosen the drain plug of the oil sump, which is located at the front bottom of the bike…

How to Replace the Air Filter on a Honda CB500X?

Replacing the air filter on the Honda CB500X, as shown in this tutorial, is a very simple and quick operation. First, remove the seat, then loosen the nut securing the negative terminal of the battery, disconnect it, and repeat the process for the positive terminal. Next, detach the upper strap, remove the battery, and unscrew the 4 screws securing the airbox cover. Once opened, you can extract the old filter, remove any residue present in the housing, and fit the new part.

Watch the video!


by ScegliAuto

More videos