Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a KTM 690 Enduro R

Model: Ktm 690 Enduro R
Part: Engine oil

Video tutorial

To change the engine oil on the KTM 690 Enduro R, you need to loosen the drain plug of the oil sump, which is located at the front bottom of the bike. Once the plug is removed, you can collect all the used oil in a container.

After the oil has been completely expelled, you can remove the oil filter, which is in the same position. After replacing the filter, you can top up the oil: it should be added through the breather located on the right side of the bike.


Updated on 3 September 2026 by ScegliAuto


Related tutorials

How to Service the KTM 690 Enduro R
How to Service the KTM 690 Enduro R
690 Enduro R In this video, you will see the main steps to replace the engine oil and oil filter while performing the regular service on the KTM 690 Enduro R. Fir…
How to Perform an Oil Change and Filter Replacement on the Ktm 690 Enduro R
How to Perform an Oil Change and Filter Replacement on the Ktm 690 Enduro R
690 Enduro R In today's video, we will see step-by-step instructions to perform the service, which includes the routine maintenance oil change and oil filter repl…
How to Set the Time on the KTM Enduro 690 R
How to Set the Time on the KTM Enduro 690 R
690 Enduro R In this new guide dedicated to your KTM Enduro 690 R, you will learn how to manually set the correct time on the display. First, insert the key and t…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos