Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a KTM 690

Model: Ktm 690 Enduro R
Part: Engine oil

Video tutorial

To change the engine oil on a KTM 690, start by warming up the engine for a few minutes to thin the oil. Turn off the engine and place the bike on a central stand for stability. Locate the oil drain plug underneath the engine.

Position a collection bowl under the plug, then use an appropriate spanner to unscrew the drain plug and let the oil fully drain into the bowl. Once all the oil has drained, securely reattach the drain plug.

Find the oil filler cap located on the side of the engine. Remove the cap and use a funnel to slowly pour in the recommended amount of new engine oil as stated in the owner's manual.

Ensure you do not exceed the maximum level indicated. After filling with new oil, replace the filler cap and tighten it well.

Start the engine for a few minutes and check for any oil leaks.


Updated on 6 October 2026 by ScegliAuto


Related tutorials

How to Service the KTM 690 Enduro R
How to Service the KTM 690 Enduro R
690 Enduro R In this video, you will see the main steps to replace the engine oil and oil filter while performing the regular service on the KTM 690 Enduro R. Fir…
How to Change the Engine Oil on a KTM 690 Enduro R
How to Change the Engine Oil on a KTM 690 Enduro R
690 Enduro R To change the engine oil on the KTM 690 Enduro R, you need to loosen the drain plug of the oil sump, which is located at the front bottom of the bike…
How to Perform an Oil Change and Filter Replacement on the Ktm 690 Enduro R
How to Perform an Oil Change and Filter Replacement on the Ktm 690 Enduro R
690 Enduro R In today's video, we will see step-by-step instructions to perform the service, which includes the routine maintenance oil change and oil filter repl…

How to Replace the Air Filter on the BMW F650 GS?

To replace the air filter on the BMW F650 GS, loosen the screws securing the panel located at the centre of the fuel tank. Once the screws are loosened, you can completely detach the panel and locate the air filter box underneath. This can now be opened to extract the air filter inside. Replace it with a new spare part, then refit the panel and check that everything is functioning correctly.

Watch the video!


by ScegliAuto

More videos