Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil Change for Royal Enfield Interceptor 650

Model: Enfield Interceptor 650
Part: Checks and maintenance

Video tutorial

Learn how to change the oil on the Royal Enfield Interceptor 650: first, remove the oil filler cap; then, go under the bike and remove the plug from the sump, collecting the used oil in a suitable container. Dispose of it at an authorised centre.

Replace the gasket on the sump plug for added safety. Change the filter; this will also leak some oil; let it drain into the same container where you collected the engine oil. A 4-litre kit of synthetic oil SAE 10w40 and the filter costs £53.48 on Amazon, with free delivery.

The gasket for the plug is also available separately, but for £0.18 for the gasket, they charge £9.95 for shipping on Auto-Doc, making it more economical to buy the kit with both plugs, lower and upper, each with its gasket, which costs £7.69 on Amazon, with free delivery.

After refitting the plug and the filter, top up the oil using a funnel and close the cap. Job done.


Updated on 25 July 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in the Royal Enfield Interceptor 650?
How to Change the Engine Oil in the Royal Enfield Interceptor 650?
Interceptor 650 In this tutorial, you will learn how to change the engine oil in the Royal Enfield Interceptor 650, a very simple and quick operation. First, ensure …
How to change the engine oil in the Royal Enfield Interceptor 650?
How to change the engine oil in the Royal Enfield Interceptor 650?
Interceptor 650 In this tutorial, you will see how to change the engine oil in the Royal Enfield Interceptor 650, an extremely simple and quick operation. First, ens…
How to replace the engine oil in the Royal Enfield Interceptor 650?
How to replace the engine oil in the Royal Enfield Interceptor 650?
Interceptor 650 In this tutorial, we can see how to replace the engine oil in the Royal Enfield Interceptor 650, an extremely simple and quick operation. First of al…

How to replace the transmission oil seal on the KTM XC 250

This guide provides the main instructions for removing and replacing the transmission oil seal on the KTM XC 250 enduro bike, as well as the XC-W 250. First, place your bike on a stand and begin by removing the gear lever by unscrewing its bolt; then remove the transmission cover and use something thin and pointed to extract the oil seal, as shown in the video. At this point, correctly install the new oil seal, pressing it in until it is flush, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos