Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This tutorial shows how to replace the front headlamp bulb on a Royal Enfield Meteor 350, a very simple and quick operation. First, ensure that the key is not inserted, then locate the two screws on either side of the headlamp and unscrew them using a standard cross-head screwdriver. Next, separate the headlamp from the base, disconnect the power connector, and remove the large rubber cap. At this point, unclip the metal clip, remove the old bulb, insert the replacement, and follow the reverse procedure.

Updated on 7 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb on the Royal Enfield Meteor 350?
How to replace the headlight bulb on the Royal Enfield Meteor 350?
Meteor 350 As shown in this tutorial, replacing the headlight bulb on the Royal Enfield Meteor 350 is an extremely simple and quick operation. First, ensure tha…
How to Replace the Headlight Bulb on a Royal Enfield Meteor 350
How to Replace the Headlight Bulb on a Royal Enfield Meteor 350
Meteor 350 In this video tutorial, you will learn how to disassemble and replace the headlight bulb on a Royal Enfield Meteor 350, following the instructions be…
How to Replace the Headlamp Bulb on the Royal Enfield Meteor 350?
How to Replace the Headlamp Bulb on the Royal Enfield Meteor 350?
Meteor 350 To replace the headlamp bulb on the Royal Enfield Meteor 350, loosen the screws that secure the headlight unit within its housing: these screws are l…

How to Remove the Final Drive from a BMW R 1200 GS?

To remove the final drive from a BMW R 1200 GS, loosen the bolts securing the exhaust so it can be removed along with the rear wheel. The rear wheel will also be removed by unscrewing the five bolts that secure it to the swingarm. Next, detach the brake caliper by unscrewing the mounting bolts and remove the rear part of the swingarm. Inside, you will find the final drive, which should be extracted and replaced with a new spare part; after replacement, reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos