Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to perform the software update for the EVO 3.

Model: EVO Evo 3 MK 1 - Years 2021-2026
Part: Onboard computer

The update of the EVO 3 is very simple to perform. The first thing to do is to connect to the SIMRAD website from your browser and access the "Manuals and Updates" section. Once inside, a new page dedicated to Downloads will open, and you should select the model of the vehicle on which you want to perform the update. Once selected, you can download the file to your PC. When the upload is complete, you will need to transfer the file to a 32-gigabyte SD card. Then, insert the card with the file into the onboard computer of the vehicle. Select "STORAGE" to access the folder containing the file, select it, and download it. When the onboard computer has finished the update procedure, it will turn off for a few seconds and then turn back on.

Posted on 26 July 2023 by ScegliAuto

Video tutorial

Related tutorials

How to clean the injection system of EVO cars?
How to clean the injection system of EVO cars?
EVO Evo 3 (2021-2026 / MK 1) Everyone has certainly heard about cleaning the injectors of their engine, which needs to be done periodically using specific additives sold in auto …
How to connect the smartphone via Bluetooth and Android Auto on the EVO 3
How to connect the smartphone via Bluetooth and Android Auto on the EVO 3
EVO Evo 3 (2021-2026 / MK 1) Shortly we will see the instructions that will allow us to connect our smartphone via Bluetooth to Android Auto of the EVO 3. First of all, we get on…
How to soundproof any EVO vehicle yourself?
How to soundproof any EVO vehicle yourself?
EVO Evo 3 (2021-2026 / MK 1) The video presented here is an excellent guide and demonstration of how it is possible, even alone, with good manual skills and dedication, to achiev…

How to Replace the Cabin Air Filter in a 2008 Volkswagen Fox

The operation of replacing the cabin pollen filter in the Volkswagen Fox takes about fifteen minutes. First, locate the filter housing inside the cabin. In this case, it is situated on the passenger side, beneath the glove compartment (as indicated by the red arrow in the images). Specifically, the air filter housing is positioned on the left side. Once located, open the cover by sliding the two rings found on the cover itself from the outside to the inside (see images) and remove it. At this point, pull down the filter housing and extract the air filter from its housing. This operation should be performed every 9,000 miles or at least once a year.

Watch the video!


by ScegliAuto

More videos