Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. Fiat Argo
  6. : Checks and maintenance

Fiat Argo - Checks and maintenance

Checks And Maintenance Fiat Argo (2017-2024 / mk 1)

Fiat Argo (2017-2024 / MK 1)
How to Disable the Start&Stop Feature on the Fiat Argo?

To disable the Start&Stop feature on the Fiat Argo, you need to completely remove the dashboard panel located just below the steering column. Once this panel …Read all…
Posted on 2 September 2026 by ScegliAuto

Speaker (1) Battery (1) Body (1) Key (5) Onboard computer (1) Checks and maintenance (1) Air filter (1) Grille (1) Tail light bulb (1) License plate light (1) Engine oil (1) Clock (6) Door trim panel (1) Front bumper (1) Brake pads (1) Brake system (1) Side mirror (2) (4) Tire pressure warning light (1) Service warning light (7) Steering wheel (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos