Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Fiat Linea
    4. : Cabin air filter

Fiat Linea - Cabin air filter

Fiat Linea (2007-2018 / MK 1)
How to replace the pollen filter in the Fiat Linea?
In the Fiat Linea, the passenger compartment air filter is located immediately behind the glovebox, protected and contained in a special box. Before replacing …read all…
Posted on 9 August 2022 by ScegliAuto
Fiat Linea (2007-2018 / MK 1)
How to replace the cabin air filter on Fiat Avventura
If we need to replace the cabin air filter on this car we will find the instructions on how to behave in the description below. The first thing to do is to …read all…
Posted on 31 May 2022 by ScegliAuto
Fiat Linea (2007-2018 / MK 1)
How to replace the cabin air filter on the Fiat Linea
To replace the passenger compartment air filter on the car it is necessary to proceed as follows: access the passenger compartment from the passenger side, …read all…
Posted on 1 May 2024 by ScegliAuto
Car stereo (3) Key (2) Timing belt (1) V-belt (1) Checks and maintenance (2) Air filter (1) Cabin air filter (3) Front bumper (1) Instrument cluster (1) Fuse box (1) Windscreen wipers (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos