Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on the Fiat Linea

Model: Fiat Linea MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Cabin air filter

Video tutorial

To replace the cabin air filter in the vehicle, follow these steps: access the cabin from the passenger side, open the glove compartment, and unclip the locks on both sides to fully tilt and remove the compartment. Behind the compartment is the filter housing.

Unscrew the retaining screw of the cover and you will be able to access and remove the filter. Take the new filter (always check the product specifications to ensure compatibility with your vehicle).

Finally, reassemble the cover and the glove compartment.


Updated on 17 May 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter in a Fiat Linea?
How to Replace the Cabin Air Filter in a Fiat Linea?
Fiat Linea (2007-2018 / MK 1) In the Fiat Linea, the cabin air filter is located directly behind the glove compartment, protected and contained in a specific box. Before replacing…
Where Are the Fuses Located on the Fiat Linea?
Where Are the Fuses Located on the Fiat Linea?
Fiat Linea (2007-2018 / MK 1) The fuses for the Fiat Linea are housed in specific fuse boxes installed in the vehicle: this car model has two. The first is located inside the cabi…
What is the fuse diagram of the Fiat Linea?
What is the fuse diagram of the Fiat Linea?
Fiat Linea (2007-2018 / MK 1) If any devices in our Fiat Linea have suddenly stopped working, we can first check the status of the relevant fuses, the diagrams of which are indica…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos