Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Air Filter in a Fiat Linea?

Model: Fiat Linea MK 1 - Years 2007-2018
Part: Air filter

As you can see in this tutorial, replacing the air filter in a Fiat Linea is an extremely simple and quick task. Before proceeding, to work safely, wait for the engine to cool completely. Start by opening the hood, then locate the airbox in the central area and remove the three upper mounting bolts. Next, disconnect the intake manifold from the throttle body, lift the box, and remove the additional three bolts located on the bottom side. At this point, you can extract the old filter, clean the inside of the housing of any debris, and install the replacement.

Updated on 11 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Linea (2007-2018 / MK 1) In the Fiat Linea, the cabin air filter is located directly behind the glove compartment, protected and contained in a specific box. Before replacing…
Fiat Linea (2007-2018 / MK 1) If you need to replace the cabin air filter on this vehicle, follow the instructions below. First, access the cabin from the passenger side and open …
Fiat Linea (2007-2018 / MK 1) To replace the cabin air filter in the vehicle, follow these steps: access the cabin from the passenger side, open the glove compartment, and unclip …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos