Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the throttle body of the Fiat Ducato?

Model: Fiat Ducato X290 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Throttle body

See other generations:
Video tutorial

In order to replace the throttle body of the Fiat Ducato, you will need to open the hood so that you can locate the components inside the engine compartment: here you will find the throttle body at the front of the engine block and you will need to remove it from its seat by disconnecting the power cables and the screws of the supports.

At this point, you can remove the old component in order to insert the new one: the new one can now be fixed and connected properly to ensure that everything works correctly.


Posted on 24 September 2025 by ScegliAuto


Related tutorials

How to replace the air filter on a Fiat Ducato
How to replace the air filter on a Fiat Ducato
Fiat Ducato (2014-2026 / X290) If you need to replace the engine air filter on your Fiat Ducato and don't know how to do it, don't worry as you just need to follow the procedure de…
How to Replace the Air Vents on a Fiat Ducato?
How to Replace the Air Vents on a Fiat Ducato?
Fiat Ducato (2014-2026 / X290) To replace the air vents on a Fiat Ducato, use a lever-like tool such as a screwdriver to detach the clips securing the vents from the inside. Once t…
How to Replace the Front Shock Absorber on a Fiat Ducato
How to Replace the Front Shock Absorber on a Fiat Ducato
Fiat Ducato (2006-2014 / X250) To replace the front shock absorber on a Fiat Ducato, lift the vehicle so that the wheels are off the ground. This will allow you to loosen the bolts…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos