Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Clean the Throttle Body and EGR Valve on the Fiat Ducato 2.5 MultiJet

Model: Fiat Ducato X290 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Throttle body

See other generations:
Video tutorial

In this video, you will learn how to clean the throttle body and EGR valve on the Fiat Ducato 2.5 MultiJet by following these simple steps. First, open the bonnet and proceed to remove the components; to do this, undo all the fastening screws on the top, also removing the headlights as shown in the video.

Next, remove the front bumper and take out the intake duct; unscrew the screws of the EGR valve to remove it. Similarly, remove the throttle body by disconnecting the position sensor, following the video to the end!


Updated on 22 April 2026 by ScegliAuto


Related tutorials

How to Remove the EGR Valve on a Fiat Ducato 2.3 MultiJet
How to Remove the EGR Valve on a Fiat Ducato 2.3 MultiJet
Fiat Ducato (2006-2014 / X250) In this guide, we will see the main instructions on how to remove and replace the EGR valve on the Fiat Ducato 2.3 MultiJet. First, open the vehicle'…
How do you disassemble the EGR valve in the Fiat Ducato 2.3 Multijet?
How do you disassemble the EGR valve in the Fiat Ducato 2.3 Multijet?
Fiat Ducato (2006-2014 / X250) The EGR valve was designed to reduce emissions from motor vehicles, in this case the Fiat Ducato 2.3 130 Multijet. It recovers part of these emission…
Removing the Throttle Body of the Fiat Ducato
Fiat Ducato (2006-2014 / X250) Today, you will learn the instructions to remove and replace the throttle body of the Fiat Ducato in simple and quick steps. First, open the bonnet o…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos