|
Do it yourself
| |||
| ||||
Door stopper for sliding door on Fiat Ducato base
Model: Fiat Ducato
X290
- Years 2014-2026
The sliding door on the camper is very nice, because it allows you to be in contact with nature, but there are occasions where we would appreciate a less wide opening: there are many types of door stops, but this is a lightweight intermediate support that comes in two versions: soft, with which the door will not be damaged if you forget the stopper during closing. Unfortunately, due to tolerances, for some this stopper does not hold at all and for others it works as if it were a rigid stopper. The hard type has a better seal, but it should not be forgotten, because the resistance can be very high and could damage the door. Both versions can be installed without tools and remain securely in place thanks to a pin and a magnet, and the door remains open 50%. Both versions can be found on shop.smarker3d.com under the category: door stopper for Fiat Ducato at a price of 13.32 euros each + shipping costs.
Posted on 25 October 2025 by ScegliAuto
Video tutorial
Related tutorials
Fiat Ducato
(2014-2026 /
X290)
This guide provides instructions for adjusting and repairing the rear sliding door of the Fiat Ducato. First, open the sliding door and begin by disa…
Fiat Ducato
(2006-2014 /
X250)
To repair the sliding door of the Fiat Ducato, first remove the inner door panel: this should simply be pried off using a screwdriver. Once the panel…
Fiat Ducato
(2006-2014 /
X250)
In order to adjust the sliding door of the Fiat Ducato, you need to pull the corresponding handle so that it can be opened and moved laterally. Once …
Other guides you may be interested in |
How to Replace the External Wing Mirror on a Ford C MAX
In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.195
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |