Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to adjust and repair the sliding door on the Fiat Ducato

Model: Fiat Ducato X290 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Car door

See other generations:
Video tutorial

This guide provides instructions for adjusting and repairing the rear sliding door of the Fiat Ducato. First, open the sliding door and begin by disassembling and removing the door closure sensor by unscrewing the fixing screws located on the sides; disconnect the electrical connector found at the back, as illustrated in the video.

At this point, check that the base on which the sensor rests is perfectly straight; if not, carry out repairs, then reassemble the door closure sensor!


Updated on 10 August 2026 by ScegliAuto


Related tutorials

How to Repair the Sliding Door of a Fiat Ducato?
How to Repair the Sliding Door of a Fiat Ducato?
Fiat Ducato (2006-2014 / X250) To repair the sliding door of the Fiat Ducato, first remove the inner door panel: this should simply be pried off using a screwdriver. Once the panel…
How to Adjust the Sliding Door on a Fiat Ducato
How to Adjust the Sliding Door on a Fiat Ducato
Fiat Ducato (2006-2014 / X250) Let’s see how to adjust the sliding door on a Fiat Ducato Van: to avoid slamming the door too hard, adjust the locking mechanism by loosening the two…
How to Adjust the Sliding Door of the Fiat Ducato?
How to Adjust the Sliding Door of the Fiat Ducato?
Fiat Ducato (2006-2014 / X250) To adjust the sliding door of the Fiat Ducato, pull the corresponding handle so that it can be opened and moved sideways: once the door is opened, lo…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos