Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Throttle Body of the Fiat Ducato

Model: Fiat Ducato X250 - Years 2006-2014
Part: Throttle body

Today, you will learn the instructions to remove and replace the throttle body of the Fiat Ducato in simple and quick steps. First, open the bonnet of your vehicle and start by removing the front bumper grille; locate the throttle body behind the radiator and fan, as shown in the video. At this point, unscrew the throttle body mounting screws and disconnect the electrical connector of the throttle position sensor; remove and replace the throttle body with the new one, applying the reverse procedure!

Updated on 25 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Fiat Ducato (2014-2026 / X290) In this video, you will learn how to clean the throttle body and EGR valve on the Fiat Ducato 2.5 MultiJet by following these simple steps. First, op…
Fiat Ducato (2014-2026 / X290) In order to replace the throttle body of the Fiat Ducato, you will need to open the hood so that you can locate the components inside the engine comp…
Fiat Ducato (2006-2014 / X250) Removing a damaged air vent? Let’s take out the vent on the Fiat Ducato. Using a screwdriver, unscrew the securing screw located under the air vent. …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos