Do it yourself
Frequently asked questions about cars and motorcycles

How do you replace the ventilation nozzles of the Fiat Ducato?

Model: Fiat Ducato X290 - Years 2014-2026
Part: Air vents

In order to replace the ventilation nozzles of the Fiat Ducato, you need to use an object that can act as a lever, such as a screwdriver, to detach the clips that secure the nozzles from the inside. Once these are detached, you can proceed by placing the new nozzles in their respective slots. After inserting them, you will need to push them downwards so that the clips inside secure the nozzle. After installation, you should check that everything is functioning correctly.

Posted on 6 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Fiat Ducato (2006-2014 / X250) Before you begin, open the bonnet of your Fiat Ducato. The thermostat is located near the bottom side of the cylinder head. Start by loosening and re…
Fiat Ducato (2006-2014 / X250) Before you start, to work safely, disconnect the battery of your Fiat Ducato. Begin by sitting in the driver's seat. Next, unscrew and remove the scr…
Fiat Ducato (2014-2026 / X290) If you need to replace the engine air filter of your Fiat Ducato on your own and do not know how to do it, do not worry because you just need to foll…

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos