Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter in a Fiat Linea?

Model: Fiat Linea MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Cabin air filter

Video tutorial

In the Fiat Linea, the cabin air filter is located directly behind the glove compartment, protected and contained in a specific box. Before replacing it, you need to disconnect the glove compartment and remove the cover of the filter box. After extracting the old cabin air filter, you can insert the new one, close the box, and properly reposition the glove compartment.

This filter should be replaced every 9,300 miles approximately, and it can be purchased for as little as $8. It is therefore not recommended to wash and reuse the old filter.


Updated on 7 June 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter in a Fiat Linea?
How to Replace the Air Filter in a Fiat Linea?
Fiat Linea (2007-2018 / MK 1) As you can see in this tutorial, replacing the air filter in a Fiat Linea is an extremely simple and quick task. Before proceeding, to work safely, w…
How to Replace the Cabin Air Filter on the Fiat Avventura
How to Replace the Cabin Air Filter on the Fiat Avventura
Fiat Linea (2007-2018 / MK 1) If you need to replace the cabin air filter on this vehicle, follow the instructions below. First, access the cabin from the passenger side and open …
How to Replace the Cabin Air Filter on the Fiat Linea
How to Replace the Cabin Air Filter on the Fiat Linea
Fiat Linea (2007-2018 / MK 1) To replace the cabin air filter in the vehicle, follow these steps: access the cabin from the passenger side, open the glove compartment, and unclip …

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos