Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Fiat Mobi
    4. : Dashboard

Fiat Mobi - Dashboard

Fiat Mobi (2016-2023 / MK 1)
How to remove the dashboard of the Fiat Mobi
If we want to disassemble the dashboard of the car it is necessary to follow the instructions below: first we must remove the car radio, being careful to …read all…
Posted on 9 May 2024 by ScegliAuto
Coil (1) Spark plugs (1) Key (1) -board computer (1) Checks and maintenance (3) Dashboard (1) Cabin air filter (2) Light bulb (1) Headlight bulb (3) Rear light bulb (1) Interior lights ceiling light bulb (1) License plate light (1) Starter motor (1) Brake pads (1) Tires (1) Gear Shift Knob (1) Fuse box (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos