Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Fiat Mobi
    4. : Checks and maintenance

Fiat Mobi - Checks and maintenance

Checks And Maintenance Fiat Mobi (2016-2024 / mk 1)

Fiat Mobi (2016-2024 / MK 1)
How to deactivate the inertial sensor that activates the FPS anti-theft system on a Fiat car.
In this video, we see how to deactivate the inertial sensor, which in turn activates the FPS (Fiat Protection System) installed on various Fiat vehicles such …Read all…
Posted on 12 January 2026 by ScegliAuto
Fiat Mobi (2016-2024 / MK 1)
How to reset the inertia switch in the Fiat Mobi?
In this tutorial, we can see how to reset the inertia switch in the Fiat Mobi, a very simple operation. The activation of the switch, indicated by the message …Read all…
Posted on 6 January 2026 by ScegliAuto
Fiat Mobi (2016-2024 / MK 1)
How to Install a Fuel-Saving Device on the Fiat Mobi
How to install the fuel-saving device on the Fiat Mobi: It works by anticipating much of the injectors' work and eliminating existing waste points. It promises …Read all…
Posted on 5 November 2026 by ScegliAuto
Fiat Mobi (2016-2024 / MK 1)
Where to Find the OBD Port on the Fiat Mobi
The OBD (On Board Diagnostic) port is the interface through which professionals communicate with the vehicle to determine what errors have been logged in the …Read all…
Posted on 19 October 2026 by ScegliAuto
Fiat Mobi (2016-2024 / MK 1)
How to Apply a Sticker on the Fiat Mobi
Many people like to customize their cars by applying weatherproof and heat-resistant stickers, or sometimes it is necessary to promote their business. Whatever …Read all…
Posted on 15 August 2026 by ScegliAuto
Ignition coil (1) Spark plugs (1) Key (1) Onboard computer (1) Checks and maintenance (5) Dashboard (1) Cabin air filter (2) Light bulb (1) Headlight bulb (3) Tail light bulb (2) Interior dome light bulb (1) License plate light (1) Starter motor (1) Clock (2) Brake pads (1) Shift knob (1) Fuse box (3) Tire pressure warning light (4) Service warning light (7)

How to Reset the Tyre Pressure Warning Light on the Jeep Compass?

To reset the tyre pressure warning light on the Jeep Compass, inflate all tyres to the correct pressure value, which is indicated on the sticker affixed to the driver’s door pillar. Once all tyres are at this pressure, switch on the ignition and press and hold the corresponding button located to the left of the steering wheel. This will turn off the warning light, but to prevent it from reactivating, you must reset the system using an OBD scanner connected to the designated port.

Watch the video!


by ScegliAuto

More videos