Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Fiat Mobi
    4. : Starter motor

Fiat Mobi - Starter motor

Starter Motor Fiat Mobi (2016-2024 / mk 1)

Fiat Mobi (2016-2024 / MK 1)
How to Replace the Starter Motor on the Fiat Mobi
If you want to perform a DIY replacement of the starter motor on this vehicle, follow the instructions below and also check the tutorial video. After opening …Read all…
Posted on 20 September 2026 by ScegliAuto
Ignition coil (1) Spark plugs (1) Key (1) Onboard computer (1) Checks and maintenance (5) Dashboard (1) Cabin air filter (2) Light bulb (1) Headlight bulb (3) Tail light bulb (2) Interior dome light bulb (1) License plate light (1) Starter motor (1) Clock (2) Brake pads (1) Shift knob (1) Fuse box (3) Tire pressure warning light (4) Service warning light (7)

How to Reset the Tyre Pressure Warning Light on the Jeep Compass?

To reset the tyre pressure warning light on the Jeep Compass, inflate all tyres to the correct pressure value, which is indicated on the sticker affixed to the driver’s door pillar. Once all tyres are at this pressure, switch on the ignition and press and hold the corresponding button located to the left of the steering wheel. This will turn off the warning light, but to prevent it from reactivating, you must reset the system using an OBD scanner connected to the designated port.

Watch the video!


by ScegliAuto

More videos