Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on the Fiat Mobi

Model: Fiat Mobi MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Starter motor

Video tutorial

If you want to perform a DIY replacement of the starter motor on this vehicle, follow the instructions below and also check the tutorial video. After opening the hood, locate the box containing the starter motor, which is at the front of the compartment.

To open the compartment, you need to detach the steel clips by pulling them towards you and remove the cover of the housing. Then, remove the starter motor, check if it is necessary to clean the housing, and place the new one, ensuring that the replacement specifications are compatible with the engine.

Finally, reposition the cover of the box and reattach the steel pins.


Updated on 3 July 2026 by ScegliAuto


Related tutorials

Where is the power window fuse located in the Fiat Mobi?
Where is the power window fuse located in the Fiat Mobi?
Fiat Mobi (2016-2024 / MK 1) If one or more power windows are malfunctioning in the Fiat Mobi, the first thing to do is check their fuses. This model has 2 fuses; let's see where…
How to Replace the Ignition Coil in a Fiat Mobi
How to Replace the Ignition Coil in a Fiat Mobi
Fiat Mobi (2016-2024 / MK 1) This guide provides instructions for removing and replacing the ignition coil in a Fiat Mobi, following these simple steps. First, open the hood of y…
What is the Fuse Box Diagram for the Fiat Mobi?
What is the Fuse Box Diagram for the Fiat Mobi?
Fiat Mobi (2016-2024 / MK 1) In this video, you can see the diagram of the fuse box for the Fiat Mobi and its respective location, useful in case you need to check the fuse for a…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Tyre Pressure Warning Light on the Jeep Compass?

To reset the tyre pressure warning light on the Jeep Compass, inflate all tyres to the correct pressure value, which is indicated on the sticker affixed to the driver’s door pillar. Once all tyres are at this pressure, switch on the ignition and press and hold the corresponding button located to the left of the steering wheel. This will turn off the warning light, but to prevent it from reactivating, you must reset the system using an OBD scanner connected to the designated port.

Watch the video!


by ScegliAuto

More videos