Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on the Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Starter motor

Knowing the exact location of the starter motor on the Fiat 500 is already a significant advantage, allowing you to set up the correct operational procedure for the replacement. From the video provided, we understand that it is located in the engine compartment, towards the bottom, so to work more easily, it is advisable to lift the vehicle, then proceed by removing the connector of the electrical connection cables and finally unscrewing the mounting bolts. Extract it from its seat and continue with the installation of the replacement, following the reverse procedure of the one previously mentioned.

Posted on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Starter Motor on a Fiat 500
Removing the Starter Motor on a Fiat 500
Fiat 500 (2007-2024 / 312) Need to replace the broken starter motor on a Fiat 500? Here’s how to remove it. Open and lift the front bonnet, disconnect the battery terminals. Lo…
Replacing the Starter Motor on the Fiat 500 1.2
Replacing the Starter Motor on the Fiat 500 1.2
Fiat 500 (2007-2024 / 312) These brief and simple steps will guide you through the process of removing and replacing the starter motor on the Fiat 500 1.2. First, open the car'…
How to Replace the Starter Motor on a Fiat 500?
How to Replace the Starter Motor on a Fiat 500?
Fiat 500 (2007-2022 / 312) To replace the starter motor on a Fiat 500, open the bonnet to access the components inside the engine bay: you will need to disconnect the battery b…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos