Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Starter Motor on the Fiat 500 1.2

Model: Fiat 500 312 - Years 2007-2024
Part: Starter motor

These brief and simple steps will guide you through the process of removing and replacing the starter motor on the Fiat 500 1.2. First, open the car's bonnet and disconnect and remove the battery by unscrewing the terminal nuts (positive and negative) and unscrewing the bracket bolt; then remove the battery holder as shown in the video. Next, unscrew the fixing bolts of the starter motor, then disconnect its electrical wiring; unscrew the lower bolts of the starter motor to remove it and replace it with the new one!

Posted on 14 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Starter Motor on a Fiat 500
Removing the Starter Motor on a Fiat 500
Fiat 500 (2007-2024 / 312) Need to replace the broken starter motor on a Fiat 500? Here’s how to remove it. Open and lift the front bonnet, disconnect the battery terminals. Lo…
Removing and Replacing the Starter Motor on the Fiat 500
Removing and Replacing the Starter Motor on the Fiat 500
Fiat 500 (2007-2022 / 312) In this short and simple guide, learn how to remove and replace the starter motor on the Fiat 500 by following the instructions below. First, open th…
Disassembly and replacement of the starter motor of the Fiat 500 1.2
Disassembly and replacement of the starter motor of the Fiat 500 1.2
Fiat 500 (2007-2024 / 312) The following steps will show us how to disassemble and replace the starter motor of the Fiat 500 1.2. First of all, we open the hood of the car and …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos