Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly and replacement of the starter motor of the Fiat 500 1.2

Model: Fiat 500 312 - Years 2007-2024
Part: Starter motor

The following steps will show us how to disassemble and replace the starter motor of the Fiat 500 1.2. First of all, we open the hood of the car and start locating the starter motor, located at the bottom right of the engine compartment; to access it, it will be necessary to first remove the battery, disconnecting both terminals and unscrewing the bracket screw, as shown in the video. At this point, disconnect the wiring of the starter motor, unscrew the fixing screws to remove it; replace it with the new one, as well as with the original one, reassembling everything!

Posted on 15 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing and Replacing the Starter Motor on the Fiat 500
Removing and Replacing the Starter Motor on the Fiat 500
Fiat 500 (2007-2022 / 312) In this short and simple guide, learn how to remove and replace the starter motor on the Fiat 500 by following the instructions below. First, open th…
Disassembly of the Fiat 500 starter motor
Disassembly of the Fiat 500 starter motor
Fiat 500 (2007-2024 / 312) Today's main steps will show us how to disassemble and replace the starter motor of the Fiat 500, following the instructions below. First, we open th…
How to Time the Engine of the Classic Fiat 500
Fiat 500 (1957-1975 / Epoca) This guide will show you the information needed to time the engine of the classic Fiat 500. First, open the rear bonnet and locate the distributor, w…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos