Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Disassembly of the Fiat 500 1.4 petrol starter motor

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2021
Part: Starter motor
Operation: Disassembly of the Fiat 500 1.4 petrol starter motor

Today we will see, in this video tutorial, the main steps and instructions to be able to disassemble the starter motor of a Fiat 500. First of all we open and lift the car and go to remove our battery, disconnecting the clamps and removing the bracket; after which we remove the battery holder and thus access the starter motor, unscrewing its fixing bolts, with a 13 mm wrench, and removing the electrical connectors. Once extracted, replace it with the new one and reassemble it by applying the reverse procedure; then follow the video to the end!


Posted on 17 January 2024 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2022 - What problems does the Fiat 500 starter have? Read Answer
    • 500 2012-2023 - How to solve the problem of the start & stop not working on the Fiat 500L? Read Answer
    • 500 2007-2021 - How much does it cost to replace the ignition lock of the Fiat 500? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos