Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the power window fuse located in the Fiat Mobi?

Model: Fiat Mobi MK 1 - Years 2016-2024
Part: Fuse box

If one or more power windows are malfunctioning in the Fiat Mobi, the first thing to do is check their fuses. This model has 2 fuses; let's see where they are located in this video. Both are found in the fuse box inside the engine compartment and are labeled F20 and F102. The amperages are 15 and 25A, respectively. If one of them is damaged and needs to be replaced, always use a replacement with the same amperage to avoid causing damage.

Updated on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

What is the Fuse Box Diagram for the Fiat Mobi?
What is the Fuse Box Diagram for the Fiat Mobi?
Fiat Mobi (2016-2024 / MK 1) In this video, you can see the diagram of the fuse box for the Fiat Mobi and its respective location, useful in case you need to check the fuse for a…
Placement of the Fiat Mobi fuse box
Placement of the Fiat Mobi fuse box
Fiat Mobi (2016-2024 / MK 1) If we need to check the status of one of the fuses in the electrical system of the Fiat Mobi, we need to know the location of the plate where they ar…
How do you reset the service light on the Fiat Mobi?
How do you reset the service light on the Fiat Mobi?
Fiat Mobi (2016-2024 / MK 1) To reset the Service light on the Fiat Mobi instrument panel, you need to connect a diagnostic tool to the vehicle's OBD port: this port can be found…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos