|
Do it yourself
| |||
| ||||
Fiat Stilo - Checks and maintenanceChecks And Maintenance Fiat Stilo (2001-2010 / mk 1)
Fiat Stilo (2001-2010 / MK 1)How to replace the headlining fabric on a Fiat Stilo? To replace the headlining fabric on a Fiat Stilo, you need to remove all the plastic parts that are in the way, such as the handles, sun visors, and the …Read all… Posted on 5 June 2026 by ScegliAuto
Fiat Stilo (2001-2010 / MK 1)Removing the Rear Seat Belt on a Fiat Stilo Learn how to remove the seat belt from a Fiat Stilo for replacement. Use a plastic lever to remove the trim above the seat belt where the seat belt retractor …Read all… Posted on 2 May 2026 by ScegliAuto
Fiat Stilo (2001-2010 / MK 1)Top Up Coolant on Fiat Stilo Top up the levels in a Fiat Stilo, here’s how to top up the coolant in the reservoir. Pull the plastic lever located at the bottom left of the dashboard, …Read all… Posted on 9 April 2026 by ScegliAuto Cigarette lighter (1) Airbag (2) Speaker (2) Car stereo (5) Bushings (1) Spark plugs (3) Glow plugs (2) Carburetor (1) Control unit (1) Key (3) Timing belt (3) Air conditioner (1) A/C controls (3) Checks and maintenance (3) Dashboard (5) Bearing (1) Brake rotors (2) Headlight (3) Air filter (4) Cabin air filter (4) Fuel filter (1) Diesel fuel filter (3) Oil filter (2) Reverse light switch (1) Light bulb (1) Side marker bulb (1) Headlight bulb (7) Tail light bulb (1) Interior dome light bulb (1) Power window motor (1) Clock (2) Door trim panel (4) Front bumper (1) Brake pads (2) Shift knob (3) Fuel pump (1) Power window switch (1) Instrument cluster (3) Radiator (1) Fuse box (9) Seat (1) Engine coolant temperature sensor (1) Side mirror (3) Warning light – error code (5) Service warning light (2) Fuel cap (1) Thermostat (2) Turbocharger (1) Blower motor (1) Steering wheel (3) |
How to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.009
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |