|
Do it yourself
| |||
| ||||
Fiat Stilo - HeadlightHeadlight Fiat Stilo (2001-2010 / mk 1)
Fiat Stilo (2001-2010 / MK 1)How to Remove the Front Headlamp on a Fiat Stilo? To remove the front headlamp on a Fiat Stilo, open the bonnet to access the screws securing the front bumper from the top. Additional screws securing the …Read all… Posted on 12 July 2026 by ScegliAuto
Fiat Stilo (2001-2010 / MK 1)Front Bulb Replacement Fiat Stilo Lift the bonnet and place the support rod. Disconnect the battery. Unscrew the four bolts that secure the upper part of the bumper, then go under the car …Read all… Posted on 29 May 2026 by ScegliAuto
Fiat Stilo (2001-2010 / MK 1)Removing the Front Headlight and Bumper from a Fiat Stilo Today, you will see how to remove the front headlight along with the bumper on a Fiat Stilo, in the sporting version. First, open the engine bonnet of your car …Read all… Posted on 3 May 2026 by ScegliAuto Cigarette lighter (1) Airbag (2) Speaker (2) Car stereo (5) Bushings (1) Spark plugs (3) Glow plugs (2) Carburetor (1) Control unit (1) Key (3) Timing belt (3) Air conditioner (1) A/C controls (3) Checks and maintenance (3) Dashboard (5) Bearing (1) Brake rotors (2) Headlight (3) Air filter (4) Cabin air filter (4) Fuel filter (1) Diesel fuel filter (3) Oil filter (2) Reverse light switch (1) Light bulb (1) Side marker bulb (1) Headlight bulb (7) Tail light bulb (1) Interior dome light bulb (1) Power window motor (1) Clock (2) Door trim panel (4) Front bumper (1) Brake pads (2) Shift knob (3) Fuel pump (1) Power window switch (1) Instrument cluster (3) Radiator (1) Fuse box (9) Seat (1) Engine coolant temperature sensor (1) Side mirror (3) Warning light – error code (5) Service warning light (2) Fuel cap (1) Thermostat (2) Turbocharger (1) Blower motor (1) Steering wheel (3) |
How to Replace the External Wing Mirror on a Ford C MAX
In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.008
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |