Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Front Bulb Replacement Fiat Stilo

Model: Fiat Stilo MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Headlight

Video tutorial

Lift the bonnet and place the support rod. Disconnect the battery. Unscrew the four bolts that secure the upper part of the bumper, then go under the car (raise it if you can) and also unscrew the lower bolts to detach the bumper from its housing but without removing it. This way, the headlight housing is free and can be removed.

Unscrew the headlight bolts and disconnect the connectors. At this point, simply move the metal hook to free and open the lower cover of the headlight, then detach the connector of the desired bulb and replace it.


Updated on 19 April 2026 by ScegliAuto


Related tutorials

Replacing the Headlight Bulbs on Fiat Stilo
Replacing the Headlight Bulbs on Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) How to replace the front headlight bulbs on Fiat Stilo? Start by lifting the front bonnet by pulling the lever located at the bottom right of the das…
Replace the Front Headlight Bulbs on Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) Replace the front headlight bulbs on the Fiat Stilo. Here’s how to change the bulbs. Using a suitable screwdriver, remove the plastic cover at the bo…
How to Change the Front Headlight Bulb on a Fiat Stilo
How to Change the Front Headlight Bulb on a Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) To replace the front headlight bulbs on a Fiat Stilo, open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos