Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Headlight and Bumper from a Fiat Stilo

Model: Fiat Stilo MK 1 - Years 2001-2010
Part: Headlight

Today, you will see how to remove the front headlight along with the bumper on a Fiat Stilo, in the sporting version. First, open the engine bonnet of your car and unscrew the side screws found on both sides of the wheel arches using a socket spanner; then unscrew the upper screws of the bumper and gently remove it, as shown in the video. At this point, unscrew the fixing screws of the front lights, which are located at the bottom and on the sides; finally, disconnect the electrical connectors found at the back of the lights to completely remove the front headlights!

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Headlamp on a Fiat Stilo?
How to Remove the Front Headlamp on a Fiat Stilo?
Fiat Stilo (2001-2010 / MK 1) To remove the front headlamp on a Fiat Stilo, open the bonnet to access the screws securing the front bumper from the top. Additional screws securing…
Replace the Front Headlight Bulbs on Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) Replace the front headlight bulbs on the Fiat Stilo. Here’s how to change the bulbs. Using a suitable screwdriver, remove the plastic cover at the bo…
Replacing the Front Headlamp Bulb on a Fiat Stilo
Replacing the Front Headlamp Bulb on a Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) In today's tutorial, you will see how to remove and replace the front headlamp bulb on a Fiat Stilo. First, open the bonnet and remove the upper Torx…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos