Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlamp on a Fiat Stilo?

Model: Fiat Stilo MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Headlight

Video tutorial

To remove the front headlamp on a Fiat Stilo, open the bonnet to access the screws securing the front bumper from the top. Additional screws securing the bumper are located in the front wheel arch. By loosening all these screws, the bumper can be removed, revealing the screws that secure the corresponding headlamp.

These screws can now be undone, allowing you to pull the headlamp from its housing and disconnect the connectors inside. At this point, connect the new headlamp, securing it properly and reinstalling the bumper.


Updated on 12 July 2026 by ScegliAuto


Related tutorials

Replacing the Left Front Headlight Bulb on a Fiat Stilo
Replacing the Left Front Headlight Bulb on a Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) To replace the left front headlight bulb on a Fiat Stilo, you must first remove the battery and then the battery tray: this will provide enough space…
Replacing the Headlight Bulbs on Fiat Stilo
Replacing the Headlight Bulbs on Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) How to replace the front headlight bulbs on Fiat Stilo? Start by lifting the front bonnet by pulling the lever located at the bottom right of the das…
Removing the Front Headlight and Bumper from a Fiat Stilo
Removing the Front Headlight and Bumper from a Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) Today, you will see how to remove the front headlight along with the bumper on a Fiat Stilo, in the sporting version. First, open the engine bonnet o…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos