Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlight Bulbs on Fiat Stilo

Model: Fiat Stilo MK 1 - Years 2001-2010
Part: Headlight bulb

How to replace the front headlight bulbs on Fiat Stilo? Start by lifting the front bonnet by pulling the lever located at the bottom right of the dashboard and secure it with the prop rod. Locate the inspection cap of the headlight (located at the rear of the headlight) and remove it. Remove the battery cover to access the back of the headlight. At this point, you will find the bulbs with metal clips. Install the new bulbs in place of the damaged ones. You can also access the headlight bulbs from underneath the splash guard at the side of the wheel.

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace the Front Headlight Bulbs on Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) Replace the front headlight bulbs on the Fiat Stilo. Here’s how to change the bulbs. Using a suitable screwdriver, remove the plastic cover at the bo…
Replacing the Rear Light Bulb on a Fiat Stilo
Replacing the Rear Light Bulb on a Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) In this video tutorial, you will learn how to remove and replace the rear light bulb on a Fiat Stilo. First, remove the rear light; open the boot and…
Replacing the Front Headlamp Bulb on a Fiat Stilo
Replacing the Front Headlamp Bulb on a Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) In today's tutorial, you will see how to remove and replace the front headlamp bulb on a Fiat Stilo. First, open the bonnet and remove the upper Torx…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos