Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Stilo
    4. : How to remove the front bumper of a Fiat Stilo

Fiat Stilo - Video tutorial

Model: Fiat Stilo MK 1 - Years 2001-2010
Part: Front bumper
Operation: How to remove the front bumper of a Fiat Stilo

Let's see how to remove the front bumper of a Fiat Stilo: lift the bonnet and put it in safety, lift the car on a jack; with a screwdriver we unscrew the tightening screws placed in the upper part of the bumper. Once the screws (pins) in the upper part have been removed: remove the screws placed in the stone guards and remove the pins located in the lower part of the bumper. We detach the bumper from the car body with our hands (we use levers to facilitate removal); we carry out the necessary maintenance and reassemble the new bumper with all the attached parts.


Posted on 11 November 2023 by ScegliAuto

This video is currently unavailable


How do you remove the headlight from the Fiat Stilo?
Fiat Stilo (2001-2010 / MK 1) To be able to remove the headlight from the Fiat Stilo, you have to go and open the bonnet, so that you can access the screws that fix the front bump
Removal of front headlight and Fiat Stilo bumper
Fiat Stilo (2001-2010 / MK 1) Today we will see how to remove the headlight together with the bumper on a Fiat Stilo, in the sporting version. First of all, we open the bonnet of
Replace the headlight bulbs on Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) We replace the headlight bulbs of the Fiat Stilo. Let's see how the bulbs are changed. With a special screwdriver we unscrew the plastic coating in t

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos