Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Stilo
    4. : How to remove the front brake disc of a Fiat Stilo

Fiat Stilo - Video tutorial

Model: Fiat Stilo MK 1 - Years 2001-2010
Part: Brake discs
Operation: How to remove the front brake disc of a Fiat Stilo

Let's see how to remove the front brake disc of a Fiat Stilo. We place our car on a column bridge, we lift to a comfortable height to intervene. Unscrew the pins with a telescopic wrench or compressed air drill and remove the rim, then we begin to unscrew the brake caliper pins by detaching it from the support. With a screwdriver we detach the brake pads. Now remove the caliper support and unscrew the pins on the disc brake (torx insert screwdriver), pull the disc towards us with our hands in order to remove it from the ruta hub. We mount the new brake disc with all the attached pieces.


Posted on 17 October 2023 by ScegliAuto



How to remove the front brake disc of a Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) .. How to remove the front brake disc of a Fiat Stilo. We place our car on a column bridge (jack), we lift..
How to remove the disc brake on Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) Intervention on the removal of a rear brake disc of a Fiat Stilo. After placing the car on a column bridge: loosen the pins with a telescopic wrench
How to change the brake pads of the Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) The replacement of the front brake pads is a maintenance that can easily be performed do-it-yourself: once the car has been raised and placed on spec

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos